Firmware Download

Changes from Version 1.20

• [Spectrum scope is improved]
  • -A Scroll mode that can seamlessly change the displayed scope range, depending on the operating frequency, is added.
  • - A popup screen that displays when SPAN or EDGE is selected is added.
  • - The number of FIX EDGE memories is expanded to 4.
  • - The Reference level is independently memorized for each band.
  • - The Reference level of the Center mode scope screen while transmitting is fixed at set level independent of the user’s selection.
  • - The Scope function of the RS-BA1 is improved.
  •     
• [Other changes]
  • -The transceiver’s settings are now retained after updating the firmware. (not when reverting to an older version)
  • -While operating in the Data mode, the Receive Tone Control is deactivated.
  • -The RS-BA1 Version 2 software will support the IC-7610's Scroll mode from its firmware Version 2.40.

Refer to INFORMATION IC-7610 Version 1.30 for details.

To update the firmware

• To update from firmware version 1.05 or older to 1.11, the IC-7610 needs to have firmware version 1.06 installed.
• Thoroughly read Section 6, SD CARD/USB FLASH DRIVE, in the BASIC MANUAL and the Section 13, UPDATING THE FIRMWARE, in the ADVANCED MANUAL, and follow the instructions displayed on the IC-7610 LCD screen.
• BE SURE to make a backup copy of your data settings to an SD card/USB flash drive before updating the firmware.
• The firmware will be updated to the following versions.
  • Main CPU: 1.30
  • Sub CPU: 1.05
  • Front CPU:1.01
  • FPGA: 1.06