DES ENCRYPION ACTIVATION CODE

EX-2785J02

Open

Descriptions

・Use to activate a DES Encryption function.

・Given code is used for specified ESN only

Ingress Protection (IP) Code

Ingress Protection (IP) ratings define the level of protection provided by enclosures to prevent the ingress of foreign objects (dust) and liquid into the electrical equipment.
International Standard IEC 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment.
The classification system uses the “IP” code, or “Ingress Protection” code, to define the level of seal.
An IP number contains two numbers (i.e. IP67) in most instances which relate to the level of protection provided by an enclosure or housing.
Either number may be shown as “X” (i.e. IPX6 / IP7X) to indicate the “X” part is not tested.

Degrees of Solid Particle Protection – 1st Digit

IP6x	No ingress of dust; complete protection against contact. (Dust tight)
IP5x	Protected from the amount of dust that would interfere with normal operation. (Dust protected)

Degrees of Liquid Ingress Protection – 2nd Digit

IPx8	Protected against continuous immersion in water. Depth and duration specified by model.
IPx7	Protected against temporary immersion in water for 1 m (3.3 ft) for 30 minutes
IPx6	Protected against water projected by powerful jets from any direction. 100 L per minute by a powerful jets (12.5 mm) for 3 minutes.
IPx5	Protected against water projected by jets from any direction. 12.5 L per minute by a nozzle (6.3 mm) for 3 minutes.
IPx4	Protected against water splashed against the equipment from any direction